Henan infrared forehead temperature gun factory about its matters needing attention?

infrared forehead temperature gun we are of course in life is also very common. Because its advantages are more prominent, there are more people who choose to use it. Today, I also use this opportunity to introduce Henan infrared forehead gun factory to tell you about its precautions? If you want to know, please come and have a look.

As a powerful manufacturer, I would like to tell you the matters needing attention here. For example, the distance between the head and the forehead of the forehead is generally 5~10CM. In order to measure body temperature more accurately, after installing the battery, it should be placed for 5-10 minutes before measuring. The product should be measured after 5-10 minutes in the new environment. It should also be noted that when in use, it should also be measured within the mapping range and in an environment with low wind speed (do not measure at the location of the tuyere, such as facing the door or facing the fan), which is susceptible to radiation interference. Therefore, radiation cosmetics and skin tones should be avoided. Because the infrared emissivity is different, it will affect the display temperature accuracy. Or its probe protection lens is a fragile part of the infrared thermometer, so be careful to protect the probe lens. Here is also a reminder, do not immerse in water or exposed to direct sunlight. Do not fall or hit hard, otherwise it will be damaged.

Henan infrared forehead temperature gun factory said the requirements of the environment is relatively high. Its working environment is 16°C to 35°C. Temperature measurement below 10 ℃ will be inaccurate, and temperature measurement in low temperature environment is more prone to deviation. This requires the personnel on duty to "warm" the thermometer (under the armpit or in a warm place) and avoid long-term exposure to ultra-low temperature or direct sunlight to ensure that there is no deviation in temperature measurement. Of course, when you use it, if the temperature is not displayed or the temperature is displayed below 36 ℃. Moreover, some personnel on duty can communicate with the masses, and it is recommended to measure the temperature of the skin part (wrist or inside neck) covered by clothes or scarf at the inspection point (to ensure the ambient temperature), 3cm away from the skin. Choosing the right temperature measurement environment and location results will be closer to the real body temperature. Henan infrared forehead temperature gun factory said that when in use, the non-contact infrared thermometer is aimed at the object to be measured and the button is pressed. At this time, pay attention to the ratio of distance to the size of the measurement area. The machine is equipped with a laser for aiming the object to be measured. Make sure that the target to be measured is larger than the measurement area of the cell. The small diameter of the measured area should be greater than 1.5 square centimeters.

The content of the above article is Henan infrared forehead temperature gun factory for friends about its matters needing attention, but also in the content to share a better Henan infrared forehead temperature gun factory. If you have this need, you can check it out and hope it can help you.